How Is My Retro Cycling Jersey Made?

September 13, 2022 3 min read

How Is My Retro Cycling Jersey Made?

We often get asked questions by our customers via email which can sometimes result in a fairly lengthy reply – although short replies are also available!

Once customers new to cycling get the bug, it's always great to see their thirst for new knowledge - asking questions of us. So this blog article is born out of an email from one of our customers to explain how a cycle jersey is made.

This article is based on information kindly provided by Santini.

Designing your retro jersey

As you are looking at the Prendas website, chances are you will have found us via the internet and we rank very well for our unique retro cycling jerseys. We try hard to offer garments that others don't – after all we don't want to all look the same now do we?

The design process for our retro jerseys generally starts with an idea sparked from trawling through our extensive archive of old books, magazines and photographs. We then carefully choose the jersey design that we want to bring back to life, with the help of Santini, a design for the jersey is then produced showing the exact layout of the panels, the logos, zip choice, cloth badges, labels etc

After a few iterations, everything is approved and the order can go into production.

Digital Print of the design

Since the late 1980's, jerseys have been primarily made from a polyester mix with the process of applying the colour to the white polyester fabric called dye-sublimation printing.

As you would expect, different manufacturers use different printing methods dependant on the quantities you are talking about. For example, if you are getting a very short run produced (small club custom jerseys), then a digital print would be used whereas if you are getting hundreds of the exact same jersey produced (like Prendas Ciclismo do) the older and more accurate method of offset printing would be preferable.

The traditional offset printing produces a higher quality print as it is far more stable because it uses single solid inks (Pantones) to produce colour, but unfortunately it only becomes cost-effective at high volume.

Whereas the Digital method uses plotters (photographed below) that have to mix colours to produce the different colours which can sometimes lead to differences in colour unless they are maintained and calibrated correctly.

Santini use specially manufactured, environment-friendly heat activated inks/dyes that are then fixed by heat and pressure into the polyester. The images from the design process are printed on a heat-resistant transfer paper and as a mirror image of the final design. The printed sheets of paper are dried and ready for sublimation.

Cutting & Sublimation Process

The fabric (for example SITIP Microsense) is cut into the various panels (you can see the cutting pattern in the La Casera design above) before the printed transfer papers are then placed on top of it and when pressure and heat are then applied using a heat press - typically 180-200°C for 35-60 seconds.

The physical process of sublimation is when the printed (solid) ink is sublimated into a gas state that then binds with the fibres of the fabric creating a virtually inseparable bond. That inseparability is relative to heat, so if you took the finished print and subjected it to a temperature source - water or gas - equivalent to the original sub process the ink could sublimate again destroying the design. In short don't iron your cycle jerseys!

The sublimation print process is complete when the paper is removed. Sublimation permanently fixes the logos/colours/graphics to the polyester fabric and the print cannot be scratched or washed out. It becomes part of the fabric.

Sewing your retro jersey together

The skilled hands of Santini's vastly experienced seamstresses then turn the various panels of fabrics into a great-looking retro jersey.

La Vie Claire Retro Jersey

Quality Control and Dispatch

After the sewing is done every product is subject to careful inspection. After that, it is carefully packed and ready for shipment to Prendas in the UK.

Santini Video: The making of a cycle jersey

Here is a short (2:08) video that Santini made explaining what I have described above in a quirky video/time lapse format.

 



Also in News and articles from Prendas Ciclismo

Vas-y Barry! Hoban wins Ghent-Wevelgem for Gan Mercier Hutchinson
Vas-y Barry! Hoban wins Ghent-Wevelgem for Gan Mercier Hutchinson

May 15, 2024 8 min read

In an extract from his autobiography, Vas-y Barry, the only British winner of Ghent-Wevelgem, Barry Hoban tells how he won the cobbled classic in 1974, beating Eddy Merckx and the cream of Belgian cycling.

Read More
Our Best Selling Caps of 2023
Our Best Selling Caps of 2023

January 15, 2024 4 min read

We know caps here at Prendas Ciclismo, and we know that you love all the styles we have on offer. So every year, we look back at our best-selling cycling caps for the previous year for you to discover a few new styles. Is your favourite cycling cap featured on our list? Read on and see!

Read More
The Ultimate Domestique: A profile of TI-Raleigh’s Henk Lubberding
The Ultimate Domestique: A profile of TI-Raleigh’s Henk Lubberding

November 16, 2023 7 min read

A profile of the TI-Raleigh team’s Henk Lubberding. For 15 years Lubberding worked in the engine room of manager Peter Post’s teams; first with TI-Raleigh, then with Panasonic. He was the perfect team man, a super-domestique and more.
Read More

Subscribe to our news!